Artwork & File Setup
Everything you need to send print-ready files for stickers, decals and graphics kits. Good files go straight into production; files that need fixing wait for us to contact you.
Quick checklist
- PDF at the size you want printed (1:1).
- Images at least 150 ppi at that size (300 ppi is better).
- Artwork extends 2 mm (0.08 in) past any cut line you supply.
- Text and logos at least 3 mm (0.125 in) inside the cut line.
- Cut lines in a spot colour named Thru-cut (or CutContour), on their own layer.
- Document colour mode set to RGB. Fonts outlined.
- One design per order line. For several designs, add each as its own line.
- No energy drink logos (see our printing policy).
Making stickers? Our die-cut sticker calculator draws the cut line and the 2 mm border for you. You only need the artwork.
File types
PDF is best. In Illustrator choose File, Save As, Adobe PDF, and pick the High Quality Print preset. From other programs, export a print PDF at 100% size.
- AI: save with Create PDF Compatible File ticked, or we cannot read it.
- EPS: accepted for graphics kits.
- PNG, JPG, WEBP: accepted in the die-cut calculator, up to 200 MB. Use PNG with a transparent background for shaped stickers.
Multi-page PDFs are fine: we print every page, so leave out anything you don't want printed, such as proof or cover pages. Please don't add crop marks or printer's marks.
Resolution
Images need at least 150 ppi at the size they will print. 300 ppi gives the sharpest result, especially for small text and fine lines. Vector artwork has no resolution limit.
| Printed width | Minimum pixels (150 ppi) | Best pixels (300 ppi) |
|---|---|---|
| 2 in (5 cm) | 300 px | 600 px |
| 3 in (7.6 cm) | 450 px | 900 px |
| 6 in (15 cm) | 900 px | 1800 px |
| 12 in (30 cm) | 1800 px | 3600 px |
Enlarging a small image does not add detail. If the die-cut calculator shows a Low resolution note, upload a bigger original or press the button to print it at the largest size that still reaches 150 ppi.
Bleed and safe zone
Bleed: when you supply your own cut line, extend the background 2 mm (0.08 in) past it. Cutting can move by a fraction of a millimetre, and bleed stops a thin white edge from showing.
Safe zone: keep text, logos and numbers at least 3 mm (0.125 in) inside the cut line so nothing important gets trimmed.
The die-cut calculator adds a 2 mm border automatically when it draws your cut line, and you can change the border width before you approve it.
Cut lines
A cut line tells our cutters where to cut. If you use the die-cut calculator, we draw it for you and you approve it on screen. If you supply your own:
- Draw it as a vector path: no fill, a thin stroke (0.25 pt is fine).
- Colour the stroke with a spot colour named exactly
Thru-cut(100% magenta is a good preview colour). We also readCutContourandThrough Cut. - For a kiss cut (cut through the vinyl only, so pieces stay on the backing sheet), use a spot colour named
Kiss-cut. - Put cut lines on their own layer, named Cut line, above the artwork.
- Use one closed path around each piece. Join open paths, and delete stray points and duplicate lines.
- Do not change the cut line to a normal (process) colour, outline its stroke or rasterize it, or our system cannot find it.
Spelling matters: a spot colour called Cutline, Cut or Die line is not read as a cut, and the order waits for us to fix it.
Sample files: download a 3 in circle sticker set up correctly, with the cut line as Thru-cut or as CutContour. Open it in Illustrator to see the swatch and layers.
Setting it up in Illustrator: Swatches panel, New Swatch, name it Thru-cut, Color Type Spot Color, any bright preview colour such as magenta. Select your cut path, set Fill to none and Stroke to the new swatch.
Colour
- Use RGB. Our print workflow is set up for RGB. In Illustrator choose File, Document Color Mode, RGB Color.
- Pantone colours are matched as closely as our inks allow. Some bright Pantones, especially fluorescents and some oranges, greens and blues, cannot be printed exactly.
- Overprint: leave it off on normal artwork. The only exception is white ink (SpotWhite), which uses Overprint Fill; see white ink.
- Screens show colour differently to print. If exact colour matters, ask for a sample pack or a printed proof.
Printing on HyperNEON, chrome or clear media, or with white ink? See special media file setup.
Graphics kit panels
- Move overlapping panels apart so every cut line is clear of the others.
- Give tank pieces extra space from the other panels on the artboard.
- Every panel gets a
Thru-cutpath; slits and partial cuts (such as tank slits) useKiss-cut.
We nest your panels onto our print sheets automatically, so you don't need to fill the artboard.
Fonts and strokes
- Outline all text (Illustrator: Type, Create Outlines). Otherwise another font may be swapped in.
- Very small text and hairlines may not print or cut cleanly. Keep fine detail away from cut lines.
- Embed linked images, or send them with the file.
Common questions
What resolution should my artwork be?
At least 150 ppi at the size it will print, and 300 ppi is better. A 3 in sticker needs an image at least 450 pixels across. Our die-cut calculator warns you when an image falls below 150 ppi at the size you choose.
How do I set up a cut line for stickers?
Draw the cut as a vector path with no fill and a thin stroke, coloured with a spot colour named exactly Thru-cut (CutContour also works). Put it on its own layer. Kiss cuts use a spot colour named Kiss-cut.
Do I need to add bleed?
Yes, if you supply your own cut line: extend the artwork 2 mm (0.08 in) past the cut so no white edge shows. The die-cut calculator adds this border for you when it draws the cut line.
Which file types do you accept?
PDF is best. We also take Illustrator files saved with PDF compatibility, EPS for graphics kits, and PNG, JPG or WEBP images in the die-cut calculator (up to 200 MB).
Should my files be RGB or CMYK?
RGB. Our print workflow is set up for RGB, so in Illustrator choose File, Document Color Mode, RGB Color. Pantone colours are matched as closely as our inks allow, but some bright Pantones cannot be printed exactly.
Still not sure? Email info@motoinkworks.com before you order and we'll check your file.

