Special Media File Setup
HyperNEON, chrome and clear media print in more than one pass, so they need a little more setup than standard white vinyl. Everything on the Artwork & File Setup page still applies; this page adds what is different.
HyperNEON
HyperNEON prints in three layers on one roll. You send one file and we build the layers automatically.
- Colour every area where the neon material should show with a spot-colour swatch named exactly
Neon Yellow(we also readFluro YellowandFluorescent Yellow). Neon Yellow is not printed: it marks where the material's own colour shows. - Use normal RGB colours for everything else. We add the white underbase under them for you.
- Use pure white (RGB 255/255/255) where you want bright white. Near-whites print as colour, not white.
- Anything under a Neon Yellow area is hidden, so you don't need to cut holes in your artwork.
- Cut lines work exactly as on standard vinyl (
Thru-cutspot colour).
White ink
White ink lets colours show on clear and chrome media, and gives solid white details.
- Apply a spot-colour swatch named exactly
SpotWhiteto the areas that should print white. - White behind colour (so red stays red on chrome instead of chrome-red): copy the shape, paste the copy above the colour artwork, apply SpotWhite to the copy, then choose Window, Attributes and tick Overprint Fill. That makes the white print underneath the colour.
- If the white shape runs past the panel, crop it to the panel outline with Pathfinder, Crop.
- For a fading white underbase, turn the gradient into a halftone in the SpotWhite swatch, keep it above the colour artwork, and tick Overprint Fill.
- Tick Spot White on the product page whenever your design uses white ink.
Clear and chrome media
-
Chrome: use a spot-colour swatch named exactly
Chromewherever the bare chrome finish should show. Like Neon Yellow, it is not printed. - Clear: use RGB 255/255/255 (pure white) where the clear material should stay see-through.
- Colours printed without white ink behind them look see-through on clear and metallic on chrome. Add SpotWhite with Overprint Fill under colours that should look solid.
- Choose the chrome or clear media in the product options; the queue and settings follow from that.
Mirrored printing
- Always send artwork the right way round (as it should read when finished).
- Sublimation transfers are mirrored automatically.
- Graphics applied to the inside of glass or clear plastic (second surface) must print mirrored. Say so in the order notes and we'll mirror it for you.
Common questions
How do I set up a file for HyperNEON?
Colour every area where the neon material should show with a spot-colour swatch named exactly Neon Yellow. Use normal RGB colours for everything else and pure white where you want bright white. We make the print layers for you, so send one file, not separate layers.
How do I add white ink?
Apply a spot-colour swatch named SpotWhite to the white areas. To put white behind a colour, paste a copy of the shape above the colour, make it SpotWhite and tick Overprint Fill. Tick Spot White on the product page too.
Do I need to mirror my artwork?
No. Always send artwork the right way round. We mirror sublimation transfers automatically, and we ask before mirroring anything else.
Unsure about a special file? Email info@motoinkworks.com before you order.

