Print Media: Vinyls & Laminates

Every MotoInkWorks job is two layers: a printed vinyl that carries your artwork and sticks to the part, and a clear laminate on top that protects the print and sets the finish. This guide explains each one so you can pick the right pair for motocross graphics, powersports kits, stickers and decals.

1. Vinyl

The printed film. It decides how strongly the graphic sticks, what surfaces it suits, and the base colour: white, chrome, fluorescent or clear.

2. Laminate

The clear layer on top. It protects against scratches, UV and fuel, adds thickness, and sets the finish: gloss, matte, flake, holographic or textured.

Vinyls

Laminates

Choosing a finish

Gloss or matte laminate?

Gloss gives the brightest colour and deepest blacks, and it is the easiest finish to wipe clean, which is why most race kits use it. Matte gives a flat, factory look with no glare and hides light scuffs, but it can mark more easily from trees and brush on trail bikes. Soft Gloss is a more flexible gloss for helmets and tight curves.

Chrome or holographic?

Chrome is a printable vinyl: the mirror is under your print, and white ink blocks it wherever you want solid colour. Holographic can be a vinyl (Holographic Chrome) or a transparent laminate on top (Spectrum). Choose chrome vinyl for metallic logos and numbers; choose a holographic laminate to add a rainbow effect over a standard white print.

Metal flake, holographic or textured?

Galactic Series laminates hold solid metal flake for a flake paint look that reads from a distance. Spectrum laminates are transparent holograms that flash colour in a pattern up close and in sunlight. ATLAS laminates are clear and textured, so they add grip and a 3D surface you can feel. All three protect the print like a standard laminate.

How thick should my graphics be?

For full motocross and powersports kits, a 6 mil X1 vinyl with a 15 mil laminate (about 21 mil in total) is the standard build. Thinner 10 mil or 8 mil laminates suit lighter, slimmer decals. Stickers use 2.75 mil films for a thin, flexible finish.

Popular pairings

Mil, microns and millimetres

Film thickness is quoted in mil, which is one thousandth of an inch. One mil is 25.4 microns (µm). A 6 mil X1 vinyl with a 15 mil 1500 laminate makes a finished decal about 21 mil thick, or roughly 0.53 mm.

Not sure which finish to pick? See and feel every media in our sample pack.