Ultracurve® X1 White

Powersports vinyls · Vinyl
Ultracurve® X1 White is the vinyl we print most motocross and powersports graphics on. It is a 6 mil film with an ultra aggressive adhesive built to grip low surface energy (LSE) plastics, the slippery, textured plastic used on fenders, shrouds, number plates and side panels.
- Printable vinyl, white
- 6 mil (152 µm)
- Ultra high tack, permanent
Standard sign vinyl struggles on these plastics: edges lift, corners peel and the graphic lets go after a few washes. X1 is engineered for exactly that surface, so the decal stays down through roost, pressure washing and crashes.
The film uses FLO air release technology. Tiny channels in the adhesive let trapped air escape, so installs go down bubble free and much faster, which matters when you are wrapping a full kit around compound curves.
We print X1 White in full colour and then laminate it. The laminate you pick sets the final look: high gloss, matte, soft gloss, metal flake, holographic or textured.
Specifications
| Type | Printable vinyl, white |
|---|---|
| Thickness | 6 mil (152 µm) |
| Adhesive | Ultra high tack, permanent |
| Air release | FLO technology, bubble free install |
| Made for | LSE and textured plastics |
Best for
- Full motocross graphics kits
- ATV, SxS and UTV kits
- E-bike and Sur-Ron kits
- Jet ski and watercraft graphics
- Ultra high tack stickers


Order on Ultracurve® X1 White
Laminates that pair with it




More Powersports vinyls


Questions
Is X1 vinyl thick enough for motocross?
Yes. X1 is 6 mil (about 153 microns) before laminate. With a 15 mil Ultracurve 1500 laminate on top, a finished decal is about 21 mil thick, which is the build most riders expect from a quality kit.
Will X1 stick to textured plastics?
Yes. That is what it is made for. Clean and degrease the plastic first, and warm the vinyl into deep texture or tight curves.
Not sure which finish to pick? See and feel every media in our sample pack.

